YW DKE TRADING COMPANY
YW DKE TRADING COMPANY
Add to Cart
The 2W Series Solenoid Valve is made from high-quality materials that are designed to provide long-lasting performance. The oil seal is made from either NBR, EPDM or VITON, depending on your specific requirements. These materials are highly resistant to wear and tear, and they can withstand high temperatures and pressures without losing their effectiveness. This makes the 2W Series Solenoid Valve an ideal choice for demanding applications where reliability and durability are essential.
The operating temperature range of the 2W Series Solenoid Valve is -5～+80℃, which means that it can be used in a wide range of different environments. This makes it suitable for use in both indoor and outdoor applications, and it can be used in a variety of different industries. Whether you need a solenoid valve for air, water, oil, gas or fuel, the 2W Series Solenoid Valve is the perfect choice.
The 2W Series Solenoid Valve is easy to install and operate. It features a simple design that is easy to understand, and it can be installed quickly and easily. It is also highly reliable and requires minimal maintenance, which makes it an ideal choice for applications where downtime is not an option.
In conclusion, the 2W Series Solenoid Valve is a high-quality water pneumatic electric solenoid valve that is designed for use in a wide range of applications. It is made from high-quality materials that are designed to provide long-lasting performance, and it has a voltage range of ±10%, which makes it suitable for a wide range of different applications. Whether you need a solenoid valve for air, water, oil, gas or fuel, the 2W Series Solenoid Valve is the perfect choice. So, if you're looking for a reliable and durable solenoid valve that is easy to install and operate, look no further than the 2W Series Solenoid Valve.
| 2W Series | 2W025-06 | 2W025-08 | 2W040-10 | 2W160-10 | 2W160-15 | 2W200-20 | 2W250-25 | 2W350-35 | 2W400-40 | 2W500-50 |
| 2S Series | 2S025-06 | 2S025-08 | 2S040-10 | 2S160-10 | 2S160-15 | 2S200-20 | 2S250-25 | 2S350-35 | 2S400-40 | 2S500-50 |
| Orifice Size | 2.5mm | 2.5mm | 4mm | 16mm | 16mm | 20mm | 25mm | 35mm | 40mm | 50mm |
| CV Value | 0.23 | 0.6 | 4.8 | 12 | 24 | 29 | 48 | |||
| Port Size | 1/8'' | 1/4'' | 3/8'' | 3/8'' | 1/2'' | 3/4'' | 1'' | 1 1/4'' | 1 1/2'' | 2'' |
| Body Material | Brass (2W Series) | |||||||||
| Stainless Steel (2S Series) | ||||||||||
| Seal Material | NBR (Standard), EPDM, VITON (Optional) | |||||||||
| Function | 2 Way Normally Closed (Standard) | |||||||||
| 2 Way Normally Open (Optional) | ||||||||||
| Operation | Direct Acting | Direct Lift Diaphragm | ||||||||
| Media | Water, Air, Oil, Gas, etc | |||||||||
| Fluid Viscosity | 20 CST below | |||||||||
| Pressure Range | 0 to 1 MPa | |||||||||
| Temperature Range | NBR: -5 to +80 ºC | |||||||||
| EPDM: -5 to +120 ºC | ||||||||||
| VITON: -10 to +150 ºC | ||||||||||
| Voltage | 12VDC, 24VDC, 24VAC, 110VAC, 220VAC | |||||||||
The valve is designed with several features to provide easy operation for clients. The valve works through direct-acting conductivity and is normally closed. The valve body is forged brass, while the size is kept small to ensure easy assembly.
The valve's voltage is 24VDC, 110VAC, and 220VAC. The tolerance for AC Voltage is ± 10%, while DC Voltage tolerance is ±1%. Other special AC/DC valves can be made to clients' order. The valve is also designed to handle different thread types, including BSPT, NPT, and BSP.
The valve's temperature can handle various levels depending on the material, including fluororubber at 130°C, Silicon at 130°C, and PTFE at 185°C. The DIN43650A connector coil is interchangeable, allowing the valve to be customized based on specific requirements.
The 2W025-08 solenoid valve is suitable for various applications such as air, water, oil, gas, and fuel. It has a voltage range of ±10%, and the operating temperature ranges between -5˚C to +80˚C. These valves are designed to operate in a variety of applications, including water brass solenoid valves, water pneumatic electric solenoid valves, and other similar applications.
The material of the oil seal is NBR, EPDM, or VITON, and it can handle fluids with a viscosity of 20 CST or below. These valves are ideal for applications that require high performance and reliability. They are widely used in various industries such as food and beverage, chemical, medical, and automotive.
The 2 2 Way Solenoid Valve product is accompanied by a range of technical support and services:
- Assistance with installation and set up
- Troubleshooting and fault diagnosis
- Maintenance and repair services
- Technical documentation and user manuals
- Training and education on product usage and operation
Product Packaging:
The 2 2 Way Solenoid Valve will be packaged in a sturdy cardboard box to ensure safe transportation. The valve will be securely placed inside a foam insert to prevent any damage during shipping.
Shipping:
We offer standard shipping options for our customers. The estimated delivery time will depend on the destination and shipping option selected. We always strive to ship orders as quickly as possible, and we will provide tracking information once the order has been shipped.